Glacier White Carved and Painted Marble 3D Tiles – 6 × 6 Inch

Glacier White Carved and Painted Marble 3D Tiles – 6 × 6 Inch

Surface adds depth and distinctive character to walls through its decorative carved details. These tiles are designed for aesthetically appealing and architecturally striking wall applications in interior spaces.

Product Specifications

• Product Name: Glacial White Engraved & Painted Marble Tiles

• Material: Natural Marble

• Color: Glacial White

• Pattern: Carved and painted geometric pattern

• Surface: Patterned with decorative detailing

• Individual Tile Size: 6 × 6 inches 

• Thickness: 3/8 inch (approximately 1 cm)

• Applications: Interior walls, decorative feature walls, and architectural interior applications
  
  

  INSTRUCTIONS MANUAL

   

  Please carefully read the following instructions manual before installation. An incorrect installation, use, or maintenance will result in the cancellation of the manufacturer’s warranty. The points listed below indicate the installer’s liabilities:

  Carefully inspect ALL material prior to installation, in order to verify that it has no defects. Materials installed with visible defects are not covered by the warranty.

  -If you are not satisfied with the material prior to installing, please contact your dealer.

  DO NOT INSTALL IT.

  -We recommend that, as final inspector, you examine the color, finish, style, and quality, BEFORE installing. Verify that the material is right. We will not be liable for any expenses incurred

  once the pieces with visible defects are installed.

  -It is the installer’s and the owner’s responsibility to ensure that work conditions and the work area are suitable, before installing the material.

   

  1. SURFACE REQUIREMENT

  Surfaces where the material is to be laid must be smooth, consistent, dry and clean.

   

  2. LAYING THE PAINTED MARBLE TILES

  We recommend dry laying the whole batch and mix pieces from different boxes before installation if necessary. To ensure that the mosaics are correctly laid, we recommend

  using high-performance cement-based adhesives.

  Before grouting the tiles, leave the adhesive to dry for at least 24-48 hours. After this drying time has elapsed, clean the surface with a moist cloth and leave to dry. Painted Marble Tiles are not suitable for shower floor use. Continuous water & humidity exposure as well as other chemicals may cause painted pattern to be wiped off.

   

  3. CLEANING

  Before the grouting material sets, any remains must be removed with a sponge or cloth. The grouting material must not be allowed to dry too much before doing this or it will hinder the

  cleaning of the tiles. This operation must be repeated at least two or three times to ensure perfectly clean tiles, rinsing the surface thoroughly with water, using a sponge or cloth.

  The use of detergents and abrasives such as cleaning powders may cause irreparable damage to the sections. If you have any doubts, contact your dealer.

   

  4. PRODUCT CARE

  The painted marble tiles that you bought come pre-sealed and don’t require resealing for at least 2 years. Reseal your painted marble tiles when water no longer beads on its surface. Resealing frequency will depend on traffic and use. We recommend FILA Sealers.

  Routine maintenance for Painted Marble Tiles includes sweeping or vacuuming to remove dirt which may scratch the surface of your tile. Clean the surfaces with a PH neutral stone and tile cleaner. Use a clean damp mop to wipe the surface. Clean up any spills immediately using only mild detergent and warm water. Never use acidic or abrasive cleaners as they may damage protective layer and wipe off the painted pattern on the stone.